Tektronix TRCP0300, User Manual, Page: 23 / 30

When clipping or unclipping the coil, hold the ferrule as shown in this
image.
WARNING. Never force the free end of the coil into the ferrule. This
could damage the coil insulation.
WARNING. Do not apply force to the cable attached to the coil. This
could damage the coil.
NOTE. When not in use, return the probe coil to the protective case it
was shipped in.
Safety and pre-use checks
WARNING. The transducer does not protect you from electric shock
while applying or removing the probe from hazardous live conductors.
Additional protective means are necessary to avoid electric shock from
hazardous live conductors which cannot be de-energized.
If hazardous live voltages are present and accessible in the
installation, appropriate protective equipment must be used.
WARNING. The Rogowski coil must not be used if the coil outer layer is
damaged or in any way compromised.
Tektronix Rogowski Current Probe
TRCP0300, TRCP0600, TRCP3000 User Manual 7