Tektronix TPS2012B, User Manual

Page: 166 / 184

Appendix C: Accessories
Table 14: Optional Accessories
TPS2PWR1 Application. The TPS2PWR1 Power Analysis Application extends power
measurement capabilities.
WST-RO CD-ROM. The WST-RO WaveStar Software for Oscilloscopes allows you to control
the oscilloscope from a PC.
TPSCHG Battery Charger. The TPSCHG external battery charger accommodates two battery
packs. Refer to International Power Cords for a list of available power cords. Battery chargers are
not rated for temperatures below 0 °C (+32 °F) or intended for outdoor use.
P5120 Passive Hi-Voltage Probe.* The probe is 200 MHz, 20X, 1000 V
RMS
and 3 meters (3.2
yards) long.
A621 AC Only Current Probe.* The probe is 5 Hz to 50 kHz with 1/10/100 mV/A settings, and
2000 APK.
A622 AC/DC Current Probe.* The probe is DC to 100 kHz with 10/100 mV/A settings, and
100 APK.
TCP303 AC/DC Current Probe (requires TCPA300 Ampli fi er).* The probe is DC to 15 MHz with
5/50 mV/A settings, 150 A
RMS
, and 500 APK.
TCP305 AC/DC Current Probe (requires TCPA300 Ampli fi er).* The probe is DC to 50 MHz with
5/10 mV/A settings, 50 A DC, and 500 APK.
TCP312 AC/DC Current Probe (requires TCPA300 Ampli fi er).* The probe is DC to 100 MHz
with 1/10 A/V settings, 30 A DC, and 500 APK.
140 TPS2000B Series Digital Oscilloscope User Manual