Tektronix TPS2012B, User Manual

Page: 146 / 184

Reference
Options Comments
Format Formats the CF card; this deletes all data on the CF card
Update Firmware Follow the on-screen directions to set up and push the Update
Firmware option button to start updating
fi rmware.
Rename File or Folder.
You can change the names of fi les and folders on the
CF card.
Option Settings Comments
Enters the highlighted alphanumeric character at the
current Name
fi eld cursor position
A - Z, 0 - 9, _,
.
Use the multipurpose knob to select an alphanumeric
character or the Backspace, Delete Character, or Clear
Name functions
Backspace Changes the menu button 1 option to the Backspace
function. Deletes the character to the left of the
highlighted character in the Name
fi eld
Delete
Character Changes the menu button 1 option to the Delete
Character function. Deletes the highlighted character
from the Name
fi eld
Enter
Character
Clear Name Changes the menu button 1 option to Clear Name.
Deletes all characters from the Name
fi eld
Vertical Controls
You can use the vertical controls to display and remove waveforms, adjust vertical
scale and position, set input parameters, and for vertical math operations. (See
page 105,
Math .)
Channel Vertical Menus There is a separate vertical menu for each channel. Each option is set individually
for each channel.
Options Settings Comments
Coupling DC, AC, Ground DC passes both AC and DC components of the
input signal
AC blocks the DC component of the input signal
and attenuates signals below 10 Hz
Ground disconnects the input signal
120 TPS2000B Series Digital Oscilloscope User Manual