Tektronix TLA7000 Series, Installation Manual

Page: 26 / 121

Basic Installation
Table 2: First time network setup
Stand-alone Workgroup Domain
Protect your PC. N/A Choose "Help protect my PC by turning on Automatic Updates
now"
What’s your computer’s name
(Wait several minutes after
answering)? Check with your network administrator for the standard naming convention of your organization. If
your organization does not have a naming convention, choose a name that follows the suggestions
given.
What’s your administrator
password? You must have an administrator account to install most software, change the workgroup, perform
Windows updates, or change
fi rewall settings. Check with your network administrator for the
appropriate password. The default administrator password on all TLA systems is blank.
Is this computer in a domain? No (Is given Workgroup membership) Yes Enter the domain name
that your instrument will log
onto.
Enter your domain settings. N/A Enter the name/password
of user who can add the
instrument to the domain.
Checking your Internet
connectivity Press ’Skip’ Wait for this to fi nish
How will this computer
connect to the Internet? N/A Choose the appropriate
answer
Setting up a high-speed
connection N/A Enter either the fi xed IP/DNS
assigned by your network
administrator or select
"Obtain Automatically".
(If LAN is connected) Will
this computer connect to the
Internet directly or through a
network? N/A Choose ’Yes through a
network’ N/A
(If LAN is not connected)
Windows unable to determine
LAN connectivity N/A Set up a LAN later. N/A
Ready to register with
Microsoft Windows is already enabled to run on your instrument. This registration is to allow Microsoft
to contact you.
Who will use this computer? Entering names here allows administrator permissions for multiple users on the instrument. By
default, their passwords are blank.
The network switch and TLA7PC1 Controller are described below; see your
router manual for speci
fi c router information.
Network Switch.
The 16 port network switch controls the data fl ow between the
controller and mainframes. Connect the GbE switch between the logic analyzer
mainframe and the TLA7PC1 Controller or an external PC (loaded with the TLA
application). (See Figure 3.)
8 TLA7000 Series Logic Analyzers Installation Manual