Basic Installation
If you plan to connect to a network, you will need the following information
from your IT department or network administrator to complete your network
con
fi
guration:
Workgroup or Domain name
IP address, either DHCP (default) or static
Domain Name Service (DNS)
Other network information from your network administrator
The Teklink/TLA7000 series mainframes require the following services:
DNS
DHCP
Firewall Blocking Network Ports.
If you are having problems with any of the
following applications, your
fi
rewall may be blocking communications using
the following network ports:
TLA Application - port 111
TPI.NET - port 9000
Windows XP Remote Desktop - port 3389
NOTE.
Tektronix recommends that you conduct a network installation site
survey with the help of your network administrator to determine the networking
requirements. A recommended site survey form is available at the end of this
document. (See page 99, TLA7000 Network Installation Site Survey.)
First Time Network Setup
Check with your network administrator to determine whether your instrument
should use the Microsoft Workgroup model or the Microsoft Domain model.
Power on your instrument and use the following table to answer the Windows
questions.
TLA7000 Series Logic Analyzers Installation Manual
7
Summary of Contents for TLA7000 Series
Page 1: ...TLA7000 Series Logic Analyzers Installation Manual www tektronix com 071 1747 03 ...
Page 72: ...Basic Installation 54 TLA7000 Series Logic Analyzers Installation Manual ...
Page 88: ...Merging Modules 70 TLA7000 Series Logic Analyzers Installation Manual ...
Page 104: ...Restoring and Reinstalling Software 86 TLA7000 Series Logic Analyzers Installation Manual ...