Tektronix TG700, User Manual

Page: 142 / 343

AVG7 Analog Video Generator
AVG7 Analog Video Generator
This section describes the module-speci fi c functions of the AVG7 Analog Video
Generator module. Refer to the following locations for additional information
about this module:
AVG7 Module Connectors for a description of the rear-panel connectors.
(See page 2-8.)
AVG7 Module Functional Check for a basic procedure to check that the
module is functional. (See page 1-19.)
TG700 Speci fi cations and Performance Veri fi cation Technical Reference for
module speci fi cations and for a detailed procedure to verify that the module
is functioning as speci fi ed.
TG700 Programmer Manual for information about the commands to remotely
control the module.
Product Description
The AVG7 Analog Video Generator module is designed to be installed in the
TG700 TV Signal Generator Platform. The TG700 platform must be running
version 3.1 or later software.
The module is an analog video signal generator which provides analog composite
and component video signals in various formats. The module contains the
following features:
Supports the following system formats: NTSC, NTSC no setup, PAL,
525 GBR, 525 YPbPr, 525 Beta, 625 GBR, and 625YPbPr.
Six analog composite or component video outputs.
Outputs a frame picture created by the Frame Picture Generator application
when 64 MB of memory is installed. (See page 1-2, Mainframe Memory
Requirements .)
Overlay of circle, text, or logo on the video signal.
Generates a moving picture by scrolling the active picture area of the output
test signal.
Full remote control using Ethernet interface.
3–30 TG700 TV Signal Generator Platform User Manual