Display a Waveform
Zooming in Multiple Areas
When you want to view and compare multiple areas of one record at the same time use the following procedure.
1.
Click and drag a box around the area of
the waveform that you want to zoom.
2.
Select
Zoom 1 On
.
3.
Click and drag a box around another
area of the waveform that you want to
zoom, and then select
Zoom 2 On
.
4.
To adjust the zoomed area horizontally,
click the horizontal marker below the
Zoom box to select the zoomed area.
5.
Use the multipurpose knobs to adjust
the horizontal position and factor of the
selected zoom area.
6.
To adjust the zoomed area vertically,
select
Vertical > Zoom Setup...
and
then use the multipurpose knobs to
adjust the Vertical Position and Factor.
Quick Tips
To clear the zoom area, click
Position Factor Reset
from the Zoom Setup control window.
You can turn each zoom display on and off from the Zoom Setup control window.
44
TDS6000B & TDS6000C Series Quick Start User Manual