Display a Waveform
Selecting the Waveform Interpolation
Select
Display > Waveform Interpolation
,
and then select one of the following:
Sin(x)/x interpolation computes record
points using a curve
fi
t between the
actual samples acquired.
Linear interpolation computes record
points between actual acquired samples
by using a straight line
fi
t.
Quick Tips
Sin(x)/x interpolation is the default interpolation mode. It requires fewer actual sample points than linear interpolation to
accurately represent the waveform.
Adding Screen Text
1.
Select
Display > Screen Text
to access
the Screen Text Setup control window.
2.
Enter up to eight lines of text to provide
notes for screen shots, printouts, or other
users.
3.
Click
Display
to turn the text display on
and off.
4.
Click
Properties
to open the Text
Properties control window for positioning
of the text on the display.
5.
Click
Clear
to erase the entire text of the
selected line.
Quick Tips
You can click and drag screen text to reposition it on the screen.
TDS6000B & TDS6000C Series Quick Start User Manual
39