Display a Waveform
Setting the Display Persistence
Select
Display > Display Persistence
, and
then select the type of persistence.
No persistence shows record points for
the current acquisition only. Each new
waveform record replaces the previously
acquired record for a channel.
In
fi
nite persistence continuously
accumulates record points until you
change one of the acquisition display
settings. Use for displaying points that
may occur outside the normal acquisition
envelope.
Variable persistence accumulates record
points for a speci
fi
ed time interval.
Each record point decays independently
according to the time interval.
1.
To set the variable persistence time,
select
Display > Display Persistence >
Persistence Controls...
.
2.
Click
Persist Time
, and then use
the multipurpose knobs to set the
persistence time.
TDS6000B & TDS6000C Series Quick Start User Manual
37