Acquisition
5.
Use the Frame Viewing controls to select
the frame that you want to view.
6.
To view multiple frames superimposed
over each other, select Overlay.
7.
Use the Time Stamps controls to select
the source for, and frame number of, the
reference frame. The reference frame
is the starting point when measuring the
relative time between two frames.
Quick Tips
Use FastFrame when you want to preserve the data associated with each trigger event for further analysis or visual
inspections.
Multiple frames are best viewed with the Normal, Green, or Gray color palettes because the dark blue selected frame
may be hard to distinguish if you use Temp or Spectral.
You can quickly set the Selected Frame and Reference Frame for time stamping by selecting
FastFrame Controls...
from the Horiz/Acq menu.
Use FastFrame when you want to capture multiple events that have long dead times between them that are of no
interest to you.
TDS6000B & TDS6000C Series Quick Start User Manual
27