Acquisition
Changing the Acquisition Mode
Use this procedure to change the acquisition mode.
1.
Select
Horiz/Acq > Acquisition Mode
.
2.
To select an acquisition mode, do one
of the following:
Select an acquisition mode directly
from the menu.
Click
Mode...,
and then select an
acquisition mode.
3.
For Average or Envelope acquisition
modes, click the
# of Wfms
control, and
then set the number of waveforms with
the multipurpose knob. For WfmDB
mode, click the
Samples
control, and
then set the number of samples with the
multipurpose knob.
You can also click the keyboard icon and
use the pop-up keypad to set the number
of waveforms or samples.
22
TDS6000B & TDS6000C Series Quick Start User Manual