Tektronix TDS5032, Manual

Page: 103 / 248

Application Examples
Generating Reports-Full Speed Signal Quality Tests for Upstream Testing
To generate reports of the test results, follow these steps:
1. From the application menu, select Utilities> Report Generator.
2. Select any one of the Report Formats: Tektronix, Plug-Fest Specific or CSV
format.
3. Select the Manual option to generate the report.
4. Select the Generate button to display and view the selected report format.
Note: You can view the Plug-Fest specific report format as HTML pages and the
.csv format in Microsoft Excel.
Inrush Current Test for a Device
Specifying the Equipment-Full Speed Inrush Current Test
The following equipment is needed for Inrush Current Check on a Full Speed
Device:
Tektronix digital oscilloscope
TDSUSB2 application
TDSUSBF compliance test fixture
One TCP202 current probe
Typical Equipment Setup-Inrush Current Test
To set up the equipment for Inrush test, follow these steps:
1. Use the dongles on the Inrush section of the test fixture to connect it to the
host system.
2. Connect the current probe between the V
BUS
loop wire on the Inrush section
on the Test fixture and Ch1 of the oscilloscope.
3. Configure the measurement and select the command button to run the
application.
TDSUSB2 Universal Serial Bus Measurement Package 89