Preface
If you have data security concerns, this document helps you to sanitize or remove memory devices from the listed products.
These products have data storage (memory) devices and data output devices (USB ports). These instructions tell you how
to clear or sanitize the memory devices, and also tell you how to declassify an instrument that is not functioning.
Instrument code and calibration settings reside in nonvolatile
fl
ash memory. Instrument setups and reference waveforms
may also be stored in
fl
ash memory or on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at www.tektronix.com/support.
Reference
The procedures in this document are written to meet the requirements speci
fi
ed in:
NISPOM, DoD 5220.22–M, Chapter 8
ISFO Process Manual for Certi
fi
cation & Accreditation of Classi
fi
ed Systems under NISPOM
Products
The following Tektronix products are covered by this document:
TDS1000B Series.
TDS1001B, TDS1002B, TDS1012B
TDS2000B Series.
TDS2002B, TDS2004B, TDS2012B, TDS2014B, TDS2022B, TDS2024B
TDS1000C-EDU Series.
TDS1001C-EDU, TDS1002C-EDU, TDS1012C-EDU
TDS2000C Series.
TDS2001C, TDS2002C, TDS2004C, TDS2012C, TDS2014C, TDS2022C, TDS2024C
TPS2000B Series.
TPS2012B, TPS2014B, TPS2024B
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
iii