Accessories and options
SMT KlipChip
Use the SMT KlipChip test clips to access
dense circuitry and IC leads spaced down to
10 mil-centers.
NOTE.
This adapter performance is best
below 100 MHz. We recommend that you use
the 250 MHz bandwidth
fi
lter with this adapter.
1.
Press the Y-lead into the handle of the
KlipChip test clip.
2.
Turn the KlipChip body to allow better
probe orientation.
3.
If necessary, bend the
fl
exible sleeve of
the KlipChip up to a 35 ° angle to reduce
stress on the connection.
Three adapters are included with the probe.
Reorder Tektronix part numbers:
206-0364-XX qty. 1
SMG50 qty. 20
TDP0500 & TDP1000 Quick Start User Manual
31
