Accessories and options
Y-Lead adapter
Use the Y-lead adapter to extend the reach of
the probe and to connect to 0.025 inch square
pins spaced as far as 1.5 inches apart.
NOTE.
This adapter performance is best
below 250 MHz. We recommend that you use
the 250 MHz bandwidth
fi
lter with this adapter.
The Y-lead adapter accepts any of the probe
tips or adapters.
1.
Push the adapter into the probe until it is
seated.
2.
Connect the adapter to your circuit or
to another adapter, such as the SMT
KlipChip.
Two adapters are included with the probe.
Reorder Tektronix part number:
196-3434-XX qty. 1
30
TDP0500 & TDP1000 Quick Start User Manual
