Installation
Menu button
1.
Press the probe
Menu
button to display the
Probe Control screen on the oscilloscope.
NOTE.
Probe menu screens vary slightly
between oscilloscope series; DPO7000 Series
screens are shown here.
This screen includes controls for probe
functions that are not accessible on the probe,
such as AutoZero and Offset. Other functions,
such as Bandwidth Limit, can be controlled
from both locations.
2.
Use the touch-screen buttons on the
instrument to set the probe parameters.
3.
Press the probe
Menu
button again to
close the Probe Control screen.
8
TDP0500 & TDP1000 Quick Start User Manual
