Preface
Returning the probe for servicing
If your probe requires servicing, you must return the probe to Tektronix. If the original packaging is un
fi
t for use or not available, use
the following packaging guidelines:
Preparation for Shipment
1.
Use a corrugated cardboard shipping
carton having inside dimensions at
least one inch greater than the probe
dimensions. The box should have a carton
test strength of at least 200 pounds.
2.
Put the probe into an antistatic bag or wrap
it to protect it from dampness.
3.
Place the probe into the box and stabilize it
with light packing material.
4.
Seal the carton with shipping tape.
5.
Refer to
Contacting Tektronix
at the
beginning of this manual for the shipping
address.
viii
TDP0500 & TDP1000 Quick Start User Manual
