Setting up the Wi-Fi network
Viewing Wi-Fi settings
Use this procedure to show the oscilloscope Wi-Fi settings.
Prerequisite: A Wi-Fi dongle is connected to the oscilloscope and Wi-Fi is turned on. (See page 85,
1.
Push the
Utility
front-panel button.
2.
Push the
Con
fi
g
side-menu button.
3.
Use the
Multipurpose
knob to select and click
Wi-Fi Con
fi
g
.
4.
Select and click
Wi-Fi Settings
. The oscilloscope shows the IP address information and the Wi-Fi SSID and connection
signal level information.
Viewing and selecting available Wi-Fi networks
Use this procedure to see the Wi-Fi networks the oscilloscope can detect, and select the Wi-Fi network to use for
communication.
Prerequisite: A Wi-Fi dongle is connected to the oscilloscope and Wi-Fi is turned on. (See page 85,
1.
Push the
Utility
front-panel button.
2.
Push the
Con
fi
g
side-menu button.
3.
Use the
Multipurpose
knob to select and click
Wi-Fi Con
fi
g
.
4.
Select and click
Available Networks
. The oscilloscope shows the networks and signal strengths of all the detected
Wi-Fi networks.
5.
Select and click the Wi-Fi network to use for communication. A check mark in the network menu means that is the
selected network for communication.
86
TBS2000 Series User Manual