Adjustments
There are no customer-performable adjustment procedures (calibrations) for the TBS1000C Series oscilloscopes. Please return the
instrument to Tektronix if an adjustment is required. Calibrations can only be performed at a Tektronix service center and require the use of
traceable test equipment (signal sources and measuring equipment) to verify the performance of the instrument.
To determine if an adjustment is required, use the Performance Verification procedure in the TBS1000C Series Digital Storage
Oscilloscopes Specifications and Performance Verification manual (Tektronix part number 077-1583-xx), available at
. Adjustment is also required after instrument repair.
Adjustments
TBS1000C Series Digital Storage Oscilloscope Service Manual
15
