Installation
Probe controls and indicators
Status LED
When the probe is powered on, the multicolor
Status LED:
Glows green after successfully
completing the power-on self test
routine. The probe is in normal
operating mode.
Glows red if an error condition exists.
Quick Tip
If the LED does not light, and other probes are
connected to the host instrument, the available
probe power may be limited. Try disconnecting
another probe from the instrument to reduce
the load.
TAP1500 1.5 GHz, 10X Active Probe Instruction Manual
3
Summary of Contents for TAP1500
