Tektronix RSA6100A Series, Help Manual

Page: 143 / 415

Analog Modulation > PM Prefs Tab
Prefs Tab
The Prefs tab enables you to change appearance characteristics of the PM display.
Setting Description
Show graticule Shows or hides the graticule.
Show Marker readout in graph
(selected marker) Shows or hides the readout for the selected marker in the graph area.
Max trace points The trace in the PM display can be set to a maximum of 100,000 points (however, the
actual number of trace points can extend up to 500,000 points if Max trace points is
set to Never Decimate). If the Analysis Length includes more than the selected Max
trace points value, the trace is decimated (using the method speci
fi ed with the Detection
control) to be equal to or less than the Max trace points setting (except when Max trace
points is set to Never Decimate). This decimated (or undecimated) trace is what is used
for marker measurements and for results export.
xxx
RSA6100A Series Real-Time Spectrum Analyzers Help
131