General Signal Viewing > Phase Vs Time
Phase Vs Time Display
Phase Vs Time Display
The Phase vs. Time display plots the signal phase against time. The phase appears on the vertical axis
while time is plotted along the horizontal axis.
Note that the trace(s) in the Phase vs. Time display can be set to a maximum of 100,000 points (however,
the actual number of trace points can extend up to 1,000,000 points if Max trace points is set to Never
Decimate). If the Analysis Length includes more than the selected Max trace points value, the trace is
decimated (using the method speci
fi
ed with the Detection control) to be equal to or less than the Max trace
points setting (except when Max trace points is set to Never Decimate). This decimated (or undecimated)
trace is what is used for marker measurements and for results export. You can set the Max trace points
on the
Settings
>
Prefs
tab.
To display Phase vs. Time:
1.
Press the
Displays
button or select
Setup
>
Displays
.
2.
In the
Select Displays
dialog, select
General Signal Viewing
in the
Folders
box.
3.
In the
Available displays
box, double-click the
Phase vs. Time
icon or select the icon and click
Add
. The Phase vs. Time icon will appear in the
Selected displays
box and will no longer appear
under Available displays.
4.
Click
OK
to show the Phase vs. Time display.
Elements of the Display
94
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
