General Signal Viewing > Frequency Vs Time
Frequency Vs Time Display
Frequency Vs Time Display
The Frequency vs. Time Display shows how the signal frequency varies with time.
Note that the trace(s) in the Frequency vs. Time display can be set to a maximum of 100,000 points
(however, the actual number of trace points can extend up to 1,000,000 points if Max trace points is set
to Never Decimate). If the Analysis Length includes more than the selected Max trace points value, the
trace is decimated (using the method speci
fi
ed with the Detection control) to be equal to or less than the
Max trace points setting (except when Max trace points is set to Never Decimate). This decimated (or
undecimated) trace is what is used for marker measurements and for results export. You can set the Max
trace points on the
Settings
>
Prefs
tab.
To display the Frequency vs. Time Display:
1.
Select the
Displays
button or
Setup
>
Displays
.
2.
In the
Select Displays
dialog, select
General Signal Viewing
in the
Folders
box.
3.
In the
Available displays
box, double-click the
Frequency vs. Time
icon or select the icon and click
Add
. The Frequency vs. Time icon will appear in the
Selected displays
box and will no longer
appear under Available displays.
4.
Click
OK
to display the Freq vs. Time display.
Elements of the Display
92
RSA6100A Series Real-Time Spectrum Analyzers Help
Summary of Contents for RSA6100A Series
Page 2: ......
Page 12: ...Table of Contents viii RSA6100A Series Real Time Spectrum Analyzers Help...
Page 28: ...Orientation Elements of the Display 16 RSA6100A Series Real Time Spectrum Analyzers Help...
Page 307: ...Search Limits Testing Define Tab Search RSA6100A Series Real Time Spectrum Analyzers Help 295...
