Specifications
Table 37: Zero Span Analog Output (Opt. 66)
Characteristic
Description
Output Voltage, typical
1.0 V @ 0 dBm input
0 dBm reference level, 10 dB/div vertical scale, measured into a 50
Ω
load.
Full-scale voltage is relative to reference level.
Output Voltage Slope, nominal
10 mV/dB
10 dB/div vertical scale, measured into a 50
Ω
load. Slope will vary with vertical
scale setting.
Maximum Output Voltage, nominal
1.25 V
Output Voltage Accuracy, typical
±5% of full-scale voltage
Output Range Log Fidelity, typical
>60 dB @ 1 GHz CF
Output Log Accuracy, typical
± 0.75 dB within range
Output Bandwidth, nominal
Up to maximum RBW
RBW as de
fi
ned by the active display.
Continuous Output, nominal
Continuous output for spans up to the maximum real-time acquisition bandwidth
of the instrument.
Output is disabled for swept spans.
Output Impedance, nominal
ON: 50
Ω
OFF: 5 k
Ω
Output Reverse Power Protection, typical
±20 V
Connector, nominal
BNC female
Output Delay Readout Accuracy, typical
±(2
μ
s + 10%)
The Delay Readout Accuracy is the delay from the RF Input to the Zero-Span Output.
Electrical Functional Speci
fi
cations
Table 38: Measurement function
Characteristic
Description
Power and Frequency Domain Measurement
Functions, nominal
Channel Power
Adjacent Channel Power
Multi-carrier Adjacent Channel Power/Leakage Ratio
dBm/Hz Marker
dBc/Hz Marker
Time Domain and Statistical Measurement
Functions, nominal
RF I/Q vs. Time
Power vs. Time
Frequency vs. Time
Phase vs. Time
CCDF
Peak-to-Average Ratio
Analog Modulation Analysis, nominal
%Amplitude Modulation (+, –, rms, modulation depth)
Frequency Modulation (±peak, +peak to –peak, rms, peak-peak/2, frequency error)
Phase Modulation (±peak, rms, +peak to –peak)
RSA5100B Series Technical Reference
43
