Specifications
Table 19: Test Parameters for Pulse to Pulse Carrier Phase/Frequency
Acquisition BW
(MHz)
Gaussian Filter BW
(MHz)
IQ Sampling Rate
(MHz)
Min Pulse Length
(ns)
Min Measurement
Timing from Rising
Edge (ns)
Std/Option B40
20
10
25
3000
1000
Std/Option B40
25
12.5
50
3000
1000
Option B85
60
30
75
1500
500
Option B85
85
42.5
150
750
250
Option B125
125
62.5
200
750
250
Option B16x
160
80
200
600
200
Table 20: Spurious response
Characteristic
Description
200 MHz to 3 GHz
<–95 dBm
3 GHz to 6.2 GHz (RSA5106B)
<–95 dBm
6.2 GHz to 15 GHz (RSA5115B)
<–95 dBm
15 GHz to 26.5 GHz (RSA5126B)
<–95 dBm
500 kHz to 32 MHz, LF Band
<–100 dBm, typical
500 kHz to 80 MHz, RF band
(RSA5103B/5106B)
<–75 dBm, typical
1 MHz to 80 MHz, RF band
(RSA5115B/5126B)
<–75 dBm, typical
Residual Response (Atten = 0 dB, Ref =
–30 dBm, RBW = 1 kHz)
80 MHz to 200 MHz, RF band
<–95 dBm, typical
Residual DC Offset after Normalization (LF
Path), typical
<-40 dBm (Ref level
≤
0 dBm)
<-40 dBm from Ref level (Ref level
> 0 dBm)
<–75 dBc (10 kHz to < 30 MHz, Ref= –30 dBm, Atten = 10 dB, RF Input Level =
–30 dBm, RBW = 10 Hz) LF path
<–75 dBc (30 MHz to < 3 GHz, Ref= –30 dBm, Atten = 10 dB, RF Input Level =
–30 dBm, RBW = 10 Hz)
<–70 dBc (3 GHz to 6.2 GHz, Ref= –30 dBm, Atten = 10 dB, RF Input Level =
–30 dBm, RBW = 10 Hz) (RSA5106B)
<–76 dBc (6.2 GHz to 15 GHz, Ref= –30 dBm, Atten = 10 dB, RF Input Level =
–30 dBm, RBW = 10 Hz) (RSA5115B)
<–72 dBc (15 GHz to 26.5 GHz, Ref= –30 dBm, Atten = 10 dB, RF Input Level =
–30 dBm, RBW = 10 Hz) (RSA5126B)
Spurious Response with Signal (Image
Suppression)
Equal or better performance is expected when Preamp is turned on and the power
level at the output of RF attenuator is lower or equal than –55 dBm.
Higher RF Order Spurious Response w/
Signal at other than Center Frequency
(6.2 GHz to 26.5 GHz)
Span
≤
25 MHz, swept spans >25 MHz,
typical
For Options B40/B85/B16x, 25 MHz <
Span
≤
160 MHz, typical
RSA5100B Series Technical Reference
25
