Functional Overview
1.
Press the side key for setting a numeric value. For example, press
FREQUENCY/CHANNEL
→
Center Freq
to set a center frequency.
The menu item changes to the display shown below.
Figure 28: Changing value with the keypad
2.
Press the keys required to enter the desired numeric value. For example, to
enter the frequency 123.45 MHz, press
1 2 3 . 4 5 MHz
.
To delete an entered number, press the
BKSP
(Backspace) key.
Figure 29: Numeric keypad
3.
Con
fi
rm the input by pressing the unit key or
ENTER
key. The con
fi
rmed
value is immediately re
fl
ected to the analyzer settings and display.
Press the
Cancel - Back
side key to cancel the change.
Changing the Step Size
When using the up and down (
▲▼
) keys to increase or decrease a setting value,
you can change the step size (the amount per press by which the up or down key
changes the setting value) with the Step Size.
In the example below, the step size for the start frequency is set to 100 kHz; the
displayed frequency set value changes by 100 kHz step for each press of the
up or down key.
34
RSA3303B, RSA3308B, and RSA3408B User Manual
Summary of Contents for RSA3303B
