Tektronix PSM3000 Series, User Manual

Page: 61 / 76

Pulse Pro fi ling Application
Store/Recall This toolbar enables you to store and recall measurement states.
Store Register.
This button allows you to store a register. A register holds an
entire state.
Recall Register. This button allows you to recall a stored register. A register
holds an entire state
Store as Name.
This button allows you to store the current setup state.
Recall as Name.
This button allows you to recall a stored named register or fi le.
Copy Trace Data. This button allows you to paste the trace data as time and
amplitude pairs into other applications, like Excel, for further analysis.
Utility
This toolbar enables you to set the instrument address and verify instrument ID. It
also allows you to perform two types of reset: default setup and factory recall.
Read more about the differences between these two options below.
Default Setup.
Click this button to reset measurement parameters only. Any
display changes, such as colors and fonts, will not be affected when you select this
default option. (See Table 2.)
Sensor ID.
Click this button to make the instrument associated with this
application session identify itself. The green LED on the related instrument
will blink four times. This is particularly useful when multiple instruments are
connected to a computer.
RF and Microwave Power Sensors/Meters 47