Tektronix P7625, Quick Start User Manual, Page: 9 / 88

General safety summary
General safety summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as speci fi ed.
Only quali fi ed personnel should perform service procedures.
To avoid fi re or personal injury
Connect and disconnect properly.
Connect the probe output to the measurement instrument before connecting the probe to the
circuit under test. Connect the probe reference lead to the circuit under test before connecting the probe input. Disconnect the probe
input and the probe reference lead from the circuit under test before disconnecting the probe from the measurement instrument.
Observe all terminal ratings.
To avoid fi re or shock hazard, observe all ratings and markings on the product. Consult the product
manual for further ratings information before making connections to the product.
Do not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of that terminal.
Do not operate without covers. Do not operate this product with covers or panels removed.
Do not operate with suspected failures.
If you suspect that there is damage to this product, have it inspected by quali fi ed
service personnel.
Avoid exposed circuitry.
Do not touch exposed connections and components when power is present.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
P7600 Series TriMode Probes Quick Start User Manual iii