Tektronix P7625, Quick Start User Manual

Page: 19 / 88

Installation
Connect the Adapters
All of the adapters mate to the P7600 Series
probe head through a keyed, multi-pin
connector that transfers the adapter information
to the oscilloscope for automatic identi
fi cation.
Connect them as follows:
1. Orient the adapter to the probe body with
the A and B inputs on top, as shown.
2. Insert the adapter into the probe head.
3. Attach the adapter to the probe head with
the hex tool included with the probe. Use
the long end of the tool as shown, and only
use enough force to ensure a secure
fi t.
CAUTION. As you tighten the adapter screw,
be careful not to damage the input cables on
adapters with integral cables.
CAUTION. Do not overtighten the adapter
screw. You can damage the connectors if you
apply too much torque to the screw.
P7600 Series TriMode Probes Quick Start User Manual 5