Maintenance
Probe calibration information
The probe does not require calibration. If a probe failure occurs, return the entire
probe to your Tektronix representative for repair.
Probe service strategy information
The following service options are available when you order your Tektronix
product:
Table 9: Service options
Option
Description
C3
Calibration Service 3 Years
Includes initial certi
fi
cations plus two annual calibrations
C5
Calibration Service 5 Years
Includes initial certi
fi
cations plus four annual calibrations
R3
Repair Service 3 Years
Return product to Tektronix for servicing
R5
Repair Service 5 Years
Return product to Tektronix for servicing
R3DW
Repair Service Coverage 3 Years
(includes product warranty period). 3-year period starts at time of
instrument purchase
R5DW
Repair Service Coverage 5 Years
(includes product warranty period). 5-year period starts at time of
instrument purchase
Perform the functional check
A functional check veri
fi
es basic functionality of the probe.
1.
Connect the probe to the logic analyzer and to an active signal source.
2.
Open the Setup window where the probes are attached to the logic analyzer.
If your logic analyzer is a TLA7000 Series mainframe with multiple modules,
open the Setup window for the module where the probes are attached.
3.
Check for signal activity in the Setup window for the attached probe.
P6910 General Purpose Probe Instruction Manual
27
Summary of Contents for P6910
