Tektronix P6249, Instruction Manual

Page: 62 / 76

Maintenance
50
P6249 4 GHz 5X Active Probe Instruction Manual
Removing and Replacing the TEKPROBE Interface Collar
To remove the TEKPROBE interface collar, firmly grasp the
compensation box body with one hand, and the TEKPROBE
interface collar with the other hand. Firmly pull the interface collar
off.
To replace the interface collar, first note the pin configuration on the
compensation box, and their holes in the interface collar. The group
of three pins fit through the smaller of the two holes in the interface
collar. See Figure 20.
Align the tab to the slot and gently press the two pieces together. See
Figure 20.
Once installed, the TEKPROBE interface collar should rotate freely
to lock and unlock.
Tab
Slot
Figure 20: Replacing the TEKPROBE interface collar