Tektronix MSO54, Programmer'S Manual

Page: 839 / 1026

Commands listed in alphabetical order
Examples
TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:VALUE "X1000"
sets the
value to X1000.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:ADDRESS:VALUE?
might return
"XXXXX", indicating that the value is XXXXX.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:BCR
This command sets or queries the value of the broadcast command received bit
(BCR bit, bit 15) in a status word for a MIL-STD-1553 bus to triggering on. The
bus number is speci
fi ed by x. The trigger condition must be set to STATus.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:BCR
{ONE|ZERo|NOCARE}
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:BCR?
Arguments
ONE
fi lters status words to only match those where the BCR bit has a value of 1.
ZERo
fi lters status words to only match those where the BCR bit has a value of 0.
NOCARE
disables fi ltering of status words on the BCR bit.
Examples
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BCR ONE
speci fi es fi ltering
status words for those where the BCR bit has a value of 1.
TRIGGER:A:BUS:B1:MIL1553B:STATUS:BIT:BCR?
might return NOCARE,
indicating that status words are not being fi ltered based on the BCR bit value.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:STATus:BIT:BUSY
This command sets or queries the value of the busy bit (BUSY bit, bit 16) in
a status word for a MIL-STD-1553 bus to triggering on. The bus number is
speci
fi ed by x. The trigger condition must be set to STATus.
Conditions Requires the SR-AERO Triggering and Analysis application.
Group
Trigger
MSO54, MSO56, MSO58, MSO58LP Programmer 2-823