Tektronix MSO54, Programmer'S Manual

Page: 830 / 1026

Commands listed in alphabetical order
Syntax
TRIGger:{A|B}:BUS:B<x>:LIN:IDentifier:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:LIN:IDentifier:VALue?
Arguments
<QString>
is the binary address string used for LIN trigger if the trigger
condition is ID or IDANDDATA.
Examples
TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE "110010"
sets the identi fi er
value to 110010.
TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE?
might return
TRIGGER:A:BUS:B1:LIN:IDENTIFIER:VALUE "XXXXXX"
indicating the
identi fi er value is XXXXXX.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:ADDRess:HIVALue
This command sets or queries the high value when triggering on command word
addresses for a MIL-STD-1553 bus. The bus number is speci
fi ed by x. The
trigger condition must be set to COMMAND, and the address quali fi er must be
INrange or OUTrange.
Conditions Requires the SR-AERO Triggering and Analysis application
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:ADDRess:HIVALue
<QString>
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:ADDRess:HIVALue?
Arguments
<QString>
is the address value.
Examples
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:HIVALUE "X1000"
sets the value to X1000.
TRIGGER:A:BUS:B1:MIL1553B:COMMAND:ADDRESS:HIVALUE?
might return
"XXXXX", indicating that the value is XXXXX.
TRIGger:{A|B}:BUS:B<x>:MIL1553B:COMMAND:ADDRess:QUALi fi er
This command sets or queries the quali fi er to be used when triggering on
command word addresses for a MIL-STD-1553 bus. The bus number is speci fi ed
by x. The trigger condition must be set to COMMAND.
2-814 MSO54, MSO56, MSO58, MSO58LP Programmer