Tektronix MSO54, Programmer'S Manual

Page: 827 / 1026

Commands listed in alphabetical order
Arguments
<QString>
is a quoted string that is the binary data string used for LIN trigger if
the trigger condition is ID or IDANDDATA.
Examples
TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE "11001010"
sets the high value
to
11001010
.
TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE?
might return
TRIGGER:A:BUS:B1:LIN:DATA:HIVALUE "XXXXXXXX"
indicating
the high value is don't care.
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:QUALi fi er
This command speci fi es the LIN data quali fi er. This only applies if the trigger
condition is IDANDDATA or DATA. The bus number is speci fi ed by <x>.
Conditions Requires the SR-AUTO Triggering and Analysis application.
Group Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|
INrange|OUTrange}
TRIGger:{A|B}:BUS:B<x>:LIN:DATa:QUALifier?
Arguments
LESSthan
sets the LIN data quali fi er to less than.
MOREthan
sets the LIN data quali fi er to greater than.
EQual
sets the LIN data quali fi er to equal.
UNEQual
sets the LIN data quali fi er to not equal.
LESSEQual
sets the LIN data quali fi er to less than or equal.
MOREEQual
sets the LIN data quali fi er to greater than or equal.
INrange
sets the LIN data quali fi er to in range.
OUTrange
sets the LIN data quali fi er to out of range.
Examples
TRIGGER:A:BUS:B1:LIN:DATA:QUALIFIER OUTRANGE
sets the data quali fi er
to out of range.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-811