Tektronix MSO54, Programmer'S Manual

Page: 637 / 1026

Commands listed in alphabetical order
Complete path speci fi cation. If the fi le argument begins with a fi le path
separator (forward slash character) or a Windows drive designator such as
C:), then the
fi le name is interpreted as a full path.
Relative path speci fi cation. If the fi le argument begins with "." or ".." or has a
fi le path separator appearing anywhere other than the fi rst character position,
then the fi le name is treated as a path that is relative to the current working
directory.
Examples
SAVE:SETUP “c:/rose_was_here.set”
saves the instrument setup in the
speci fi ed fi le.
SAVe:SETUp:INCLUDEREFs
This command sets or queries whether displayed reference waveforms are to
be included in saved setups.
Group
Save and Recall
Syntax
SAVe:SETUp:INCLUDEREFs {OFF|ON|0|1}
SAVe:SETUp:INCLUDEREFs?
Arguments
OFF
speci fi es not including displayed reference waveforms in saved setups.
ON
speci fi es including displayed reference waveforms in saved setups.
0
speci fi es not including displayed reference waveforms in saved setups.
1
speci fi es including displayed reference waveforms in saved setups.
Examples
SAVE:SETUP:INCLUDEREFS 0
sets reference waveforms not to be included in
saved setups.
SAVE:SETUP:INCLUDEREFS
? might return
:SAVE:SETUP:INCLUDEREFS 1
indicating that reference waveforms are to be included in saved setups.
SAVe:WAVEform (No Query Form)
This command saves the speci fi ed waveform(s) to the speci fi ed destination fi le.
The waveform source or sources must be active (turned on) to save data to a fi le.
Group
Save and Recall
MSO54, MSO56, MSO58, MSO58LP Programmer 2-621