Tektronix MSO54, Programmer'S Manual

Page: 626 / 1026

Commands listed in alphabetical order
Group Digital
Syntax
REF<x>_DALL:LABel:YPOS <NR3>
Arguments
<NR3>
is the y-position, in pixels relative to the baseline of the waveform, of
the group.
Examples
REF1_DALL:LABel:YPOS 50
sets the y position to 50.
REF1_DALL:LABel:YPOS?
might return
:REF1_DALL:LABEL:YPOS 0.0E+0
indicating the y position of the label is at the baseline of the waveform.
REF<x>_D<x>:LABel:COLor
This command sets or queries the color of the label of the speci fi ed digital bit.
The reference is speci fi ed by x.
Group Digital
Syntax
REF<x>_D<x>:LABel:COLor <QString>
Arguments
<QString>
is the label color. To return the color to the default color, send an
empty string as in this example:
:REF5_D1:LABEL:COLOR ""
.
Examples
REF1_D1:LABel:COLor "#FF0000"
sets the color to red.
REF1_D1:LABel:COLor?
might return
:REF1_D1:LABEL:COLOR "#FFFF00"
indicating the color is yellow.
REF<x>_D<x>:LABel:FONT:BOLD
This command sets or queries the bold state of the label of the speci fi ed digital bit.
The reference is speci fi ed by x.
Group Digital
Syntax
REF<x>_D<x>:LABel:FONT:BOLD {ON|OFF|<NR1>}
2-610 MSO54, MSO56, MSO58, MSO58LP Programmer