Tektronix MSO54, Programmer'S Manual

Page: 602 / 1026

Commands listed in alphabetical order
POWer:POWer<x>:SOA:VSOURce
This command sets or queries the voltage source for SOA measurement in the
speci
fi ed power measurement badge. The power measurement badge is speci fi ed
by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:SOA:VSOURce
{CH<x> | MATH<x> | REF<x>}
POWer:POWer<x>:SOA:VSOURce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:SOA:VSOURce CH1
sets the voltage source for SOA
measurement as channel 1.
POWer:POWer<x>:SWITCHINGLOSS:DEVICEType
This command sets or queries the conduction calculation method for switching
loss measurement in the speci
fi ed power measurement badge. The power
measurement badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:SWITCHINGLOSS:DEVICEType
{MOSFET | BJT}
POWer:POWer<x>:SWITCHINGLOSS:DEVICEType?
Examples
POWer:POWer1:SWITCHINGLOSS:DEVICEType MOSFET
sets the conduction
calculation method as mosfet for switching loss measurement of the power
measurement badge Power 1.
2-586 MSO54, MSO56, MSO58, MSO58LP Programmer