Tektronix MSO54, Programmer'S Manual

Page: 598 / 1026

Commands listed in alphabetical order
POWer:POWer<x>:SOA:ISOURce
This command sets or queries the current source for SOA measurement in the
speci
fi ed power measurement badge. The power measurement badge is speci fi ed
by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:SOA:ISOURce
{CH<x> | MATH<x> | REF<x>}
POWer:POWer<x>:SOA:ISOURce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:SOA:ISOURce CH2
sets the current source for SOA
measurement as channel 2.
POWer:POWer<x>:SOA:POINT
This command sets or queries the Y co-ordinate value for SOA mask.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:SOA:POINT
<QString> <NR1>
POWer:POWer<x>:SOA:POINT
<QString>?
Arguments
<QString>
= 1Y | 2Y | 3Y | 4Y | 5Y | 6Y | 7Y | 8Y | 9Y | 10Y | 11Y | 12Y | 13Y
| 14Y | 15Y | 16Y | 17Y | 18Y | 19Y | 20Y | 21Y | 22Y | 23Y | 24Y | 25Y | 26Y
| 27Y | 28Y | 29Y | 30Y | 31Y | 32Y
<NR1>
ranges from –5000 to 5000
2-582 MSO54, MSO56, MSO58, MSO58LP Programmer