Tektronix MSO54, Programmer'S Manual

Page: 590 / 1026

Commands listed in alphabetical order
For Positive Duty Cycle measurement, the parameters is “PDUTY”.
For Negative Duty Cycle measurement, the parameters is “NDUTY”.
For Positive Pulse Width measurement, the parameters is “PPULSE”.
For Negative Pulse Width measurement, the parameters is “NPULSE”.
For Cycle Amplitude measurement, the parameters is “AMPL”.
For Cycle Peak–Peak measurement, the parameters is “PKPK”.
For Cycle Top measurement, the parameters is “HIGH”.
For Cycle Base measurement, the parameters is “LOW”.
For Cycle Max measurement, the parameters is “MAX”.
For Cycle Min measurement, the parameters is “MIN”.
Examples
POWer:POWer1:RESUlts:CURRentacq:MINimum? "TruePwr"
might
return 5.1307829019093E–9, indicating the minimum value of true power for
the current acquisition.
POWer:POWer<x>:RESUlts:CURRentacq:PK2PK? (Query Only)
This command queries the peak-to-peak value of the current acquisition for the
measurement parameter in the speci
fi ed power measurement badge. The power
measurement badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:RESUlts:CURRentacq:PK2PK?
<QString>
Arguments
<QString>
= parameters of the measurements. The details of the parameters for
the Power measurements are listed below:
For Power Quality measurement, the parameters are "TRUEPWR" | "APPPWR"
| "REPWR" | "PWRFACTOR" | "PHASE" | "PWRFREQ" | "ICFACTOR" |
"VCFACTOR" | "IRMS" | "VRMS".
For Switching Loss measurement, the parameters are "TONENRG" | "TONLOSS"
| "TOFFENRG" | "TOFFLOSS" | "CONDENRG" | "CONDLOSS" | "TTLLOSS" |
"TTLENRG".
For dV by dt measurement, the parameter is “DVBYDT”.
2-574 MSO54, MSO56, MSO58, MSO58LP Programmer