Tektronix MSO54, Programmer'S Manual

Page: 577 / 1026

Commands listed in alphabetical order
POWer:POWer<x>:REFLevels:PERCent:TYPE
This command sets or queries the reference levels for the speci fi ed power
measurement badge. The power measurement badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group
Power
Syntax
POWer:POWer<x>:REFLevels:PERCent:TYPE
{TENNinety | TWENtyeighty
| CUSTom}
POWer:POWer<x>:REFLevels:PERCent:TYPE?
Related Commands POWer:POWer<x>:REFLevels:METHod , POWer:POWer<x>:REFLevels:
PERCent:FALLHigh , POWer:POWer<x>:REFLevels:PERCent:FALLLow ,
POWer:POWer<x>:REFLevels:PERCent:FALLMid , POWer:POWer<x>:
REFLevels:PERCent:RISEHigh , POWer:POWer<x>:REFLevels:PERCent:
RISELow , POWer:POWer<x>:REFLevels:PERCent:RISEMid ,
Arguments
TENNinety
to set the low reference levels as 10% and high reference levels as
90%
TWENtyeighty
to set the low reference levels as 20% and high reference levels
as 80%
CUSTom
to set the custom low, high, and mid reference levels for rising and
falling edges
Examples
POWer:POWer1:REFLevels:PERCent:TYPE TENNinety
sets the low
reference levels as 10% and high reference levels as 90% for the power
measurement badge 1.
POWer:POWer<x>:RESUlts:ALLAcqs:MAXimum? (Query Only)
This command queries the maximum value of all acquisitions for the measurement
parameter in the speci
fi ed power measurement badge. The power measurement
badge is speci fi ed by x.
Conditions
Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
MSO54, MSO56, MSO58, MSO58LP Programmer 2-561