Tektronix MSO54, Programmer'S Manual

Page: 565 / 1026

Commands listed in alphabetical order
Syntax
POWer:POWer<x>:PERIOD:INPUTSOurce
{CH<x> | MATH<x> | REF<x>}
POWer:POWer<x>:PERIOD:INPUTSOurce?
Arguments
CH<x>
= A channel speci fi er; <x> is 1 through 8 and is limited by the number
of FlexChannels in your instrument.
MATH<x>
= A math waveform speci fi er; <x> is ≥ 1.
REF<x>
= A reference waveform speci fi er; <x> is ≥ 1.
Examples
POWer:POWer1:PERIOD:INPUTSOurce CH6
sets the input source for period
measurement as channel 6.
POWer:POWer<x>:POWERQUALITY:CCYCles
This command sets or queries the calculate cycles over full cycles settings for the
speci
fi ed power quality measurement badge. The power measurement badge
is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
Group Power
Syntax
POWer:POWer<x>:POWERQUALITY:CCYCles
{ON | OFF 1 | 0}
POWer:POWer<x>:POWERQUALITY:CCYCles?
Arguments
1 | ON
selects the calculate cycles over full cycles.
0 | OFF
unselects the calculate cycles over full cycles.
Examples
POWer:POWer1:POWERQUALITY:CCYCles 1
selects the calculate cycles over
full cycles for the power measurement badge 1.
POWer:POWer<x>:POWERQUALITY:FREFerence
This command sets or queries the frequency reference type for power quality
measurement in the speci
fi ed power measurement badge. The power measurement
badge is speci fi ed by x.
Conditions Requires option 5-PWR, SUP5-PWR, or 5-PS2.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-549