Tektronix MSO54, Programmer'S Manual

Page: 503 / 1026

Commands listed in alphabetical order
MEASUrement:MEAS1:SSC:NOMinalfreq:SELECTIONtype?
might
return
:MEASUREMENT:MEAS1:SSC:NOMINALFREQ:SELECTIONTYPE AUTO
indicating the auto-detection type is selected.
MEASUrement:MEAS<x>:TOEdge
This command sets or queries the 'to edge' type for the measurement. The
measurement number is speci
fi ed by x.
Group Measurement
Syntax
MEASUrement:MEAS<x>:TOEdge
{SAMEas|OPPositeas|RISe|FALL|BOTH}
MEASUrement:MEAS<x>:TOEdge?
Arguments
FALL
speci fi es the falling edge of the waveform.
RISE
speci fi es the rising edge of the waveform.
BOTH
speci fi es both a rising and falling edge of the waveform.
SAMEas
speci fi es that both edges of the waveform are the same.
OPPositeas
speci fi es that the edges of the waveform are not the same.
Examples
MEASUrement:MEAS1:TOEdge FALL
speci fi es the to edge is the falling edge
of the waveform.
MEASUrement:MEAS1:TOEdge?
might return
:MEASUREMENT:MEAS1:TOEDGE
SAMEAS
indicating that both edges of the waveform are the same.
MEASUrement:MEAS<x>:TOEDGESEARCHDIRect
This command sets or queries the to edge search direction for the measurement.
The measurement number is speci
fi ed by x.
Group Measurement
Syntax
MEASUrement:MEAS<x>:TOEDGESEARCHDIRect {FORWard|BACKWard}
MEASUrement:MEAS<x>:TOEDGESEARCHDIRect?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-487