Tektronix MSO54, Programmer'S Manual

Page: 453 / 1026

Commands listed in alphabetical order
Syntax
MEASUrement:MEAS<x>:CLOCKRecovery:MEANAUTOCalculate
{FIRST|EVERY}
MEASUrement:MEAS<x>:CLOCKRecovery:MEANAUTOCalculate?
Arguments
FIRST
calculates the clock on the fi rst acquisition.
EVERY
calculates the clock on every acquisition.
Examples
MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate EVERY
causes
the clock to be calculated on every acquisition.
MEASUrement:MEAS1:CLOCKRecovery:MEANAUTOCalculate?
might return
:MEASUREMENT:MEAS1:CLOCKRECOVERY:MEANAUTOCALCULATE FIRST
indicating the clock is calculated on the fi rst acquisition.
MEASUrement:MEAS<x>:CLOCKRecovery:METHod
This command sets or queries the clock recovery method for the measurement.
Measurements are speci
fi ed by x.
Group Measurement
Syntax
MEASUrement:MEAS<x>:CLOCKRecovery:METHod
{PLL|CONSTANTCLOCK|EXPLICITCLOCK}
MEASUrement:MEAS<x>:CLOCKRecovery:METHod?
Arguments
PLL
speci fi es a phase locked loop clock recovery method.
CONSTANTCLOCK
speci fi es using a constant clock.
EXPLICITCLOCK
speci fi es using an explicit clock.
Examples
MEASUrement:MEAS1:CLOCKRecovery:METHod PLL
speci fi es a phase locked
loop clock recovery method.
MEASUrement:MEAS1:CLOCKRecovery:METHod?
might return
:MEASUREMENT:MEAS1:CLOCKRECOVERY:METHOD CONSTANTCLOCK
indicating a constant clock is in use.
MEASUrement:MEAS<x>:CLOCKRecovery:MODel
This command sets or queries the PLL clock recovery model used when PLL
clock recovery is used for the measurement. Measurements are speci
fi ed by x.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-437