Tektronix MSO54, Programmer'S Manual

Page: 348 / 1026

Commands listed in alphabetical order
Examples
FILESYSTEM:COPY "E:/setup1.set","E:/SETUPS/setup1.set"
copies
the fi le named setup1.set, on the E drive to a fi le named setup1.set in the SETUPS
directory on the E drive.
:FILESystem:CWD "E:/SETUPS"
:FILESystem:COPy ".","I:/Archive/SETUPS"
:FILESystem:COPy "../ch1.isf","I:/SavedWfms/ch1_new.isf"
FILESystem:CWD
This command sets or queries the current working directory. CWD is short
for Current Working Directory. It changes the directory (folder) that the other
FILESystem commands operate on.
NOTE. There are three host ports on the front , E:, F:, and G: and two on the
back H: and I:
Group File System
Syntax
FILESystem:CWD {<new working directory path>}
FILESystem:CWD?
Arguments
<new working directory path>
is a quoted string that de fi nes the current
working; a directory name can be up to 128 characters.
Examples
FILESYSTEM:CWD "E:/waveforms/"
changes the current working directory
to a folder named "waveforms" on the USB fl ash drive installed in the "E:" USB
Host port.
FILESYSTEM:CWD?
might return
:FILESYSTEM:CWD "E:/"
Indicates the
current working directory is the root folder of the E: USB fl ash drive port.
FILESystem:DELEte (No Query Form)
This command (no query form) deletes a named fi le or directory from a mass
storage device. Once removed, the data in that fi le or directory can no longer be
accessed. If the speci fi ed fi le is a directory, it must be empty before it can be
deleted.
Group
File System
2-332 MSO54, MSO56, MSO58, MSO58LP Programmer