Tektronix MSO54, Programmer'S Manual

Page: 325 / 1026

Commands listed in alphabetical order
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Group Display Control
Syntax
DISplay:WAVEView<x>:REF:REF<x>:VERTical:SCAle <NR3>
DISplay:WAVEView<x>:REF:REF<x>:VERTical:SCAle?
Arguments
<NR3>
is the vertical scale of the speci fi ed reference waveform.
Examples
DISplay:WAVEView1:REF:REF1:VERTical:SCAle 400e-3
sets the scale to
400 mV per division.
DISplay:WAVEView1:REF:REF1:VERTical:SCAle?
might return
:DISPLAY:WAVEVIEW1:REF:REF1:VERTICAL:SCALE 378.0000E-3
indicating the scale is 378 mV per division.
DISplay:WAVEView<x>:STYle
This command sets or queries how the waveforms are displayed for analysis mode.
NOTE.
WAVEView<x>
is the speci fi ed waveview and must be
WAVEView1
.
Group Display Control
Syntax
DISplay:WAVEView<x>:STYle {VECtors|DOTsonly}
DISplay:WAVEView<x>:STYle?
Arguments
DOTs
displays individual data points. New points immediately replace old ones.
VECtors
connects adjacent data points. New points immediately replace old ones.
Examples
DISplay:WAVEView1:STYle VECTORS
sets the display to connect adjacent
data points.
DISplay:WAVEView1:STYle?
might return
:DISplay:WAVEView1:STYle
DOTs
, indicating that data points are not connected.
DISplay:WAVEView<x>:VIEWStyle
The command sets or queries the waveform layout style used by the display.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-309