Tektronix MSO54, Programmer'S Manual

Page: 292 / 1026

Commands listed in alphabetical order
Group Display Control
Syntax
DISplay:REFFFTView<x>:GRIDlines {HORizontal|VERTical|BOTH}
DISplay:REFFFTView<x>:GRIDlines?
Arguments
HORizontal speci fi es horizontal grid lines.
VERTical speci fi es vertical grid lines.
BOTH speci fi es both horizontal and vertical grid lines.
Examples
DISplay:REFFFTView5:GRIDlines hhorizontal
speci fi es horizontal gird
lines.
DISplay:REFFFTView5:GRIDlines?
might return
:DISPLAY:REFFFTVIEW5:GRIDLINES BOTH
indicating that both vertical
and horizontal grid lines are diplayed
DISplay:REFFFTView<x>:REF:REF<x>:STATE
This command sets or queries the state of the speci fi ed reference waveform in
the speci fi ed waveview.
Group Display Control
Syntax
DISplay:REFFFTView<x>:REF:REF<x>:STATE boolean
DISplay:REFFFTView<x>:REF:REF<x>:STATE?
Arguments
<NR1>
= 0 disables the speci fi ed reference; any other value turns this feature on.
OFF
disables the display the speci fi ed reference.
ON
enables the speci fi ed reference.
Examples
DISplay:REFFFTView5:REF:REF5:STATE 0
turns display of the reference off.
DISplay:REFFFTView5:REF:REF5:STATE?
might return
:DISPLAY:REFFFTVIEW5:REF:REF5:STATE 1
indicating the
reference is displayed.
DISplay:REFFFTView<x>:XAXIS:SCALE
This command sets or queries the x-axis scale setting for Ref FFT.
2-276 MSO54, MSO56, MSO58, MSO58LP Programmer