Tektronix MSO54, Programmer'S Manual

Page: 279 / 1026

Commands listed in alphabetical order
DISplay:PLOTView1:ZOOM:YAXIS:TO?
might return
:DISPLAY:PLOTVIEW3:ZOOM:YAXIS:FROM 0.0E+0
indicating the
top value of the zoom y-axis is 0.0 hits (for a histogram plot, or it could be Volts
for an XY plot).
DISplay:REFFFTView<x>:AUTOScale
This command sets or queries the enabled state of auto-scale for plots.
Group
Display Control
Syntax
DISplay:REFFFTView<x>:AUTOScale
{OFF|ON|0|1}
DISplay:REFFFTView<x>:AUTOScale?
Arguments
<NR1>
= 0 disables auto-scale on the speci fi ed reffftview; any other value turns
this feature on.
OFF
disables auto-scale on the speci fi ed reffftview.
ON
enables the speci fi ed channel on the speci fi ed waveview.
Examples
DISplay:REFFFTView1:AUTOScale 1
enables auto-scale on the speci fi ed
view.
DISplay:REFFFTView5:AUTOScale?
might return
:DISPLAY:REFFFTVIEW5:AUTOSCALE 1
indicating auto-scale is on.
DISplay:REFFFTView<x>:CURSor:ASOUrce? (Query Only)
This command returns the cursor source for plot cursor A
Group Cursor
Syntax
DISplay:REFFFTView<x>:CURSor:ASOUrce?
Returns Returns the cursor source for plot cursor A.
Examples
DISplay:REFFFTView5:CURSor:ASOUrce?
might return
:DISPLAY:REFFFTVIEW5:CURSOR:ASOURCE REF5
indicating the A cursor
source is reference 5.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-263