Tektronix MSO54, Programmer'S Manual

Page: 266 / 1026

Commands listed in alphabetical order
Examples
DISplay:PLOTView1:CURSor:DDT?
might return
:DISPLAY:PLOTVIEW1:CURSOR:DDT 131.0470E+6
indicating the cursor
readout value is 131.0470E+6.
DISplay:PLOTView<x>:CURSor:FUNCtion
This command sets or queries the cursor mode of the speci fi ed cursor in the
speci fi ed view.
Group
Cursor
Syntax
DISplay:PLOTView<x>:CURSor:FUNCtion
{WAVEFORM|VBArs|HBArs|SCREEN}
DISplay:PLOTView<x>:CURSor:FUNCtion?
Arguments
WAVEFORM
speci fi es to display the paired cursors in YT display format for
measuring waveform amplitude and time.
VBArs
speci fi es vertical bar cursors, which measure in horizontal units.
HBArs
speci fi es horizontal bar cursors, which measure in vertical units.
SCREEN
speci fi es to display both horizontal and vertical bar cursors, which
measure the selected waveform in horizontal and vertical units. Use these cursors
to measure anywhere in the waveform display area.
Examples
DISplay:PLOTView1:CURSor:FUNCtion VBAR
S displays vertical bar cursors.
DISplay:PLOTView1:CURSor:FUNCtion?
might return
:DISPLAY:PLOTVIEW1:CURSOR:FUNCTION SCREEN
indicating that
both horizontal and vertical bar cursors are displayed.
DISplay:PLOTView<x>:CURSor:HBArs:APOSition
This command sets or queries the vertical cursor A position of the speci fi ed cursor
in the speci fi ed view.
Group Cursor
Syntax
DISplay:PLOTView<x>:CURSor:HBArs:APOSition <NR3>
DISplay:PLOTView<x>:CURSor:HBArs:APOSition?
2-250 MSO54, MSO56, MSO58, MSO58LP Programmer