Tektronix MSO54, Programmer'S Manual

Page: 261 / 1026

Commands listed in alphabetical order
Examples
DISplay:MATHFFTView1:XAXIS:SCALE LOG
speci fi es a logarithmic scale.
DISplay:MATHFFTView1:XAXIS:SCALE?
might return
:DISPLAY:MATHFFTVIEW1:XAXIS:SCALE LINEAR
indicates the
scale setting is linear.
DISplay:MATHFFTView<x>:YAXIS:SCALE
This command sets or queries the vertical scale setting for FFT Maths, either
Linear or dBm.
Group
Display Control
Syntax
DISplay:MATHFFTView<x>:YAXIS:SCALE {LINEAr|DBM}
DISplay:MATHFFTView<x>:YAXIS:SCALE?
Arguments
LINEAr
speci fi es a linear scale.
DBM
speci fi es a dBm scale.
Examples
DISplay:MATHFFTView1:YAXIS:SCALE LINEAR
speci fi es a linear scale.
DISplay:MATHFFTView1:YAXIS:SCALE?
might return
:DISPLAY:MATHFFTVIEW1:YAXIS:SCALE DBM
incicating the scale
is dBm.
DISplay:MATHFFTView<x>:ZOOM:XAXIS:FROM
This command sets or queries the value of the left edge of the speci fi ed plot view.
Group Zoom
Syntax
DISplay:MATHFFTView<x>:ZOOM:XAXIS:FROM <NR3>
DISplay:MATHFFTView<x>:ZOOM:XAXIS:FROM?
Arguments
<NR3>
is the value of the left edge of the zoom x axis in the speci fi ed plot view.
Examples
DISplay:MATHFFTView1:ZOOM:XAXIS:FROM 800.e6
sets the x axis value of
the left edge of the plot view to 800 MHz.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-245