Tektronix MSO54, Programmer'S Manual

Page: 256 / 1026

Commands listed in alphabetical order
DISplay:MATHFFTView1:CURSor:SCREEN:BYPOSition?
might
return
:DISPLAY:MATHFFTVIEW1:CURSOR:SCREEN:BYPOSITION
-59.0460929065173
indicating the cursor position is at -59.0 dBm.
DISplay:MATHFFTView<x>:CURSor:STATE
This command sets or queries the visible state of the speci fi ed cursor in the
speci fi ed view.
Group Cursor
Syntax
DISplay:MATHFFTView<x>:CURSor:STATE
DISplay:MATHFFTView<x>:CURSor:STATE?
Arguments
OFF
turns off the cursor.
ON
displays the cursor.
<NR1>
= 0 turns off the cursor; any other value displalys the cursor.
Examples
DISplay:MATHFFTView1:CURSor:STATE OFF
turns off the cursor.
DISplay:MATHFFTView1:CURSor:STATE?
might return
:DISPLAY:MATHFFTVIEW1:CURSOR:STATE 1
indicating the cursor
is displayed.
DISplay:MATHFFTView<x>:CURSor:VBArs:APOSition
This command sets or queries the horizontal cursor A position of the speci fi ed
cursor in the speci fi ed view.
Group Cursor
Syntax
DISplay:MATHFFTView<x>:CURSor:VBArs:APOSition <NR3>
DISplay:MATHFFTView<x>:CURSor:VBArs:APOSition?
Arguments
<NR3> is the horizontal cursor A position of the speci fi ed cursor in the speci fi ed
view.
Examples
DISplay:MATHFFTView1:CURSor:VBArs:APOSition 500.0e6
sets the
cursor position to 500 MHz.
2-240 MSO54, MSO56, MSO58, MSO58LP Programmer